The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
Flush type low heat The area of the chip can support itself to cool when the current is low
Supports a lot of stepper motors
The advantages in the high-speed running condition.
1.4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver
2.Standard parallel port , supports Mach2/3,EMC2, KCAM 4 etc.
3.Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments
4.Limit and emergency stop port ( standard DB9 port)
4 working modes: mixed mode , fast mode, slow mode, standard mode
4-microstep: 1 1/2 1/4 1/16
12-36V single power input uses the switch power chip as the 5V power supply, stable and low heat
Adopts RC + 7414 auto semi-flow
The relay output can control the main axis
5th axis extension control port
Question and Answer:
Q1:why other supplier's TB6560 driver has 3.5A/3A current,but yours is 2.5A?
A :TB6560 chip average output current is 2.5A,peak current is 3.5A,and can drive small than 3A stepper motor,ours 2.5A means the top average output current in real,also it is a long time security value,this is not design problem,it is according to the TB6560 chip self specification.
It is not worthy to save small money to buy a driver board but broken mainboard or lose step and skewing when engraving.